Tools Required; Removing The Lh 3000R Covers - HP D7171A - NetServer - LPr Installation Manual

Chapter 3
NOTE If the backlight on the LCD display is on, standby power is
also on.

Tools Required

l
Torx 15 Driver
l
Torx 25 Driver (rack-mount only)
l
An anti-static service kit (3M 8501/8502/8503 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.

Removing the LH 3000r Covers

1. Extend the anti-tip foot from under the front of the rack.
WARNING
This anti-tip device must be extended to prevent the rack and
NetServer from tipping over, which could damage the
NetServer and injure people.
30
Opening and Closing the HP NetServer
Leveler
Feet
Figure 3-2. Rack Anti-tip Foot
Anti-Tip
Foot