HP D7171A - NetServer - LPr Installation Manual page 2

Notice
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of merchantability and fitness for
a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing, performance, or use
of this material.
Hewlett-Packard assumes no responsibility for the use or reliability of its software on
equipment that is not furnished by Hewlett-Packard.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied, reproduced, or translated to
another language without the prior written consent of
Hewlett-Packard Company.
Windows NT, Windows 95, and Windows 98 are registered trademarks of Microsoft in the
U.S. and other countries. Novell NetWare and IntranetWare are registered trademarks of
Novell. SCO and SCO Unix are registered trademarks of the Santa Cruz Operation. UNIX
is a registered trademark in the United States and other countries, licensed exclusively
through X/Open Compamy Limited. PcAnywhere32 is a trademark of Symantec
Corporation. Intel , Pentium, and i960RD are registered trademarks of Intel Corporation.
3M is a trademark of the Minnesota Mining and Manufacturing Company. Symbios is a
registered trademark of LSI Logic Corp. Torx is a registered trademark of
CamCar/Textron, Incorporated. Tinnerman is a registered trademark of Eaton/Tinnerman.
Hewlett-Packard Company
Network Server Division
Technical Communications/MS 45SLE
10955 Tantau Avenue
Cupertino, California 95014-0770 USA
© Copyright 1999, Hewlett-Packard Company.
Audience Assumptions
The guide is for the person who installs, administers, and troubleshoots network servers.
Hewlett-Packard Company assumes you are qualified in the servicing of computer
equipment and trained in recognizing hazards in products with hazardous energy levels and
are familiar with weight and stability precautions for rack installations.
ii