Chapter 13
17. Insert the slide fixed mounting flange between the column and bar nuts.
Press the slide firmly against the front column (see Figure 13-6).
Figure 13-6. Securing the Slide to the Front Column
NOTE
The slide members cannot be removed.
18. Tighten both screws in the mounting flanges of the slide.
19. Insert the threaded stud on the rear of the slide into the rear
column-mounting hole marked earlier.
20. Secure the slide with a hex nut and lock washer saved earlier.
21. Repeat steps 14 through 20 and install the second slide in the rack.
Alternative Rack Mounting
1. Insert
mounting
flange of slides
between
bar nut and
rear side of
column face.
2. Press slide
tightly against
column and
tighten
screws to
hold slide
in place.
151