Panasonic WV-SC384 Operating Instructions Manual page 35

■ JPEG recording
This setting is available only when "JPEG" is selected
for "Recording format" of the SD memory card.
[File name]
Enter the file name used for the image to be saved on
the SD memory card. The file name will be as follows.
File name: ["Entered file name" + "Time and date (year/
month/ day/ hour/ minute/ second)"] + "Serial num-
ber"
Available number of characters: 1 - 8 characters
Note:
• When "H.264" is selected for "Recording format",
the name of the saved file will be given automati-
cally.
• When "FTP error" is selected for "Save trigger", the
file name entered for "File name" on the [FTP img.
trans.] tab of the "Network" page will be used for
the file name of the image saved on the SD memory
card.
[Image saving interval/Number of images to be
saved - Image saving interval]
When "Alarm input" or "Manual" is selected for "Save
trigger", select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
Default: 1fps
[Image saving interval/Number of images to be
saved - Number of images to be saved]
Select a number of alarm images to be saved on the
SD memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/
300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
Default: 100pics
Note:
• When "H.264" is selected for "Recording format",
Pre alarm and Post alarm can be set on "H.264
recording" of [Alarm] tab.
• "Number of images to be saved" can be configured
only when "Alarm input" is selected for "Save trig-
ger".
[Image capture size]
When "Manual" is selected for "Save trigger" and
"JPEG" is selected for "Recording format", select the
image capture size of the images to be saved on the
SD memory card from the following.
When "4:3(VGA)" is selected for "Aspect ratio"
QVGA/ VGA/ 1280x960
When "4:3(800x600)" is selected for "Aspect ratio"
SW395 SC385
QVGA/ 800x600/ 1280x960
When "16:9" is selected for "Aspect ratio"
320x180/ 640x360/ 1280x720
Default: VGA
Note:
• When "FTP error" is selected for "Save trigger",
images will be saved with the image capture size
selected on the [FTP img. trans.] tab of the
"Network" page.
• When "H.264" is selected for "Recording format",
select the image capture size for "H.264 recording"
- "Image capture size" on the [SD memory card] tab.
• When "Alarm input" is selected for "Save trigger",
images will be saved with the image capture size
selected on the [Alarm] tab of the "Alarm" page.
■ H.264 recording
This setting is available only when "H.264" is selected
for "Recording format" of the SD memory card.
When the second [Set] button on the setup page is
clicked, the settings for "H.264 recording" will be dis-
played on the bottom of the tab.
[Image capture size]
Select the image capture size from the following.
When "4:3(VGA)" is selected for "Aspect ratio"
QVGA/ VGA
SC384
QVGA/ VGA/ 1280x960
When "4:3(800x600)" is selected for "Aspect ratio"
SW395 SC385
QVGA/ 800x600/ 1280x960
When "16:9" is selected for "Aspect ratio"
320x180/ 640x360
320x180/ 640x360/ 1280x720
Default: VGA
[Recording priority]
Select "Constant bit rate" or "Frame rate" for the H.264
recording mode.
Constant bit rate: H.264 images will be recorded with
the bit rate selected for "Max. bit rate".
35
SW395 SC385
SC384
SW395 SC385