Panasonic WV-SC384 Operating Instructions Manual page 12

Note:
• When a user is using the audio transmission func-
tion with "Interactive(Half-duplex)" selected, the
receiver button and the transmission button will be
inoperable for the other users. When
"Interactive(Full-duplex)" is selected, the transmis-
sion button is inoperable for other users.
• Possible duration of audio transmission is up to 5
minutes per transmission. When 5 minutes have
passed, the audio transmission will automatically
stop. To turn the audio transmission function on,
click the [Audio output] button again.
• When the camera is restarted, the adjusted volume
level (for both the audio transmission and reception)
will return to the level that had been set on the
[Audio] tab on the setup menu. (☞ Page 73)
• Actual volume level will change in three steps even
though the volume cursor can be adjusted minutely.
@3 SD recording status indicator
The status of the SD recording can be checked with
this indicator.
When the SD recording starts, the SD recording sta-
tus indicator will light red. It will go off when the SD
recording stops.
This indicator will be displayed when "Manual" or
"Schedule" is selected for "Save trigger" on the
setup menu. (☞ Page 34)
@4 Main area (*2)
Images from the camera will be displayed in this
area. The current time and date will be displayed
according to the settings configured for "Time dis-
play format" and "Date/time display format".
(☞ page 29)
In addition, when being adjusted, the status of
brightness (☞ page 30), panning/tilting degree and
the zoom factor (☞ page 57), and the preset ID
(☞ page 68) will be displayed as well as the charac-
ters configured for "Camera title on screen" (☞ page
30). The number of lines for the display is 3 when
using WV-SW395/WV-SC385, 2 when using
WV-SC384.
Click a desired point in the main area on the "Live"
page that is to be the center of the angle of view.
The camera moves to adjust the position in order to
set the clicked point as the center.
When selecting an area in the main area by drag-
ging the mouse, the selected area will be located at
the center of the main area. In this case, the zoom
ratio will be adjusted automatically.
Zoom can be adjusted using the mouse wheel.
*1 Only operable by users whose access level is
"1. Administrator".
*2 Only operable by users whose access level is
"1. Administrator" or "2. Camera control" when
"On" is selected for "User auth." (☞ Page 87).
*3 Operable by users who belong to the access
level selected for "Permission level of audio
trans./recep." on the [Audio] tab of the "Image/
Audio" page. Refer to page 73 for further infor-
mation about the "Permission level of audio
trans./recep.".
Note:
• When operated by a lower access level user, images
displayed on the screen may be changed temporar-
ily. This does not affect operation of the camera.
• When the displayed image is being zoomed in more
than 18x, the clicked point may not always be
located at the center of the main area.
• When the mouse is dragged to move the camera
beyond its operable range, the camera will move to
the requested direction and will stop at the end of
the operable range. Then, the zoom ratio of the dis-
played image will automatically be adjusted.
• Depending on the PC in use, screen tearing* may
occur when the shooting scene drastically changes
due to the GDI restrictions of the OS.
* A phenomenon in which portions of the screen are
displayed out of alignment
12 12