Start Hp Netraid Assistant - HP D5970A - NetServer - LCII Configuration Manual

Chapter 8
3. HP NetRAID Access Service: Start it by double-clicking on its Windows
icon or by loading NetWare module raidserv.nlm.
NOTE
To change the password for a server using Windows NT, run
setpass.exe under \netraid\dll\.
To change the password for a server using NetWare, reinstall
the HP NetRAID management software, as described in this
chapter, with the new password.

Start HP NetRAID Assistant

Run HP NetRAID Assistant from a client or server in which the HP NetRAID
Assistant utility was installed by clicking on the NetRAID Assistant icon in the
NetRAID program group (or group you specified).
If HP NetRAID Assistant is started on a standalone server, the main window is
displayed immediately.
Configuration
Adapter Physical
Menu Menu Drive Menu
S e r v e r
S e e c t o r
P h y s c a
D r v e s
Figure 8-1. HP NetRAID Assistant Window
Managing Servers Over the Network
Logical Help
Progress
Drive Menu Menu Menu
A d a p t o r S e e c t o r
Toggle to switch
between v
e w s
87