Edit The Regserv.dat And Hosts Files - HP D5970A - NetServer - LCII Configuration Manual

Chapter 8
9. When Setup asks for the next diskette, remove Diskette 1 and insert
Diskette 2 of "NetRAID Assistant for Windows NT and Windows 95."
Setup copies various files.
10. In the Setting Password window, type the password that must be given for
Full Access mode to manage this server. Passwords are case-sensitive.
NOTE
11. Choose to restart Windows now or defer this until later. The Setup
program is now complete.

Edit the regserv.dat and hosts Files

12. Edit the regserv.dat file to replace localhost with the name of the
Registration Server for this network.
In Windows NT systems you will find regserv.dat under this
pathname where <winnt path> is the path to the Windows files:
<winnt path>\system32\drivers\etc\regserv.dat
In Windows 95 systems you will find regserv.dat under this
pathname where <win95 path> is the path to the Windows files:
<win95 path>\system\regserv.dat
13. Add to the hosts file the names and IP addresses of servers with
adapters to be managed over the network.
In Windows NT systems you will find the hosts file under this
pathname where <winnt path> is the path to the Windows files:
<winnt path>\system32\drivers\etc\hosts
In Windows 95 systems you will find the hosts file under this
pathname where <win95 path> is the path to the Windows files:
<win95 path>\system\hosts
84
Managing Servers Over the Network
The Setting Password Screen appears only if you
installed HP NetRAID Access Service in Step 6.