Hp Netraid Config - HP D5970A - NetServer - LCII Configuration Manual

Chapter 10

HP NetRAID Config

HP NetRAID Config performs the same functions as HP NetRAID Assistant, but
it runs under Novell NetWare. HP NetRAID Config allows you to reconfigure
and manage your RAID system and monitor its status.
You do not need to reboot your HP NetServer to use HP NetRAID Config.
To start HP NetRAID Config utility if you have Novell NetWare, type
load megamgr
For a list of functions performed by HP NetRAID Config, see the menu chart that
follows.
For complete instructions on using HP NetRAID Config, see the HP NetRAID
Series User Guide.
Understanding HP NetRAID Utilities
101