Run Setup - HP D5970A - NetServer - LCII Configuration Manual

Chapter 8

Run Setup

To run the Setup program, follow the steps listed below for either Microsoft
Windows NT 4.0 or Windows 95:
1. Select Start from the taskbar. Then choose Run from the Start menu.
2. Insert Diskette 1 of "NetRAID Assistant for Windows NT and
Windows 95."
3. Type <d>:\setup at the Open prompt, where <d> is the drive letter of
the diskette drive you are using.
4. On the User Information screen, type the user name and the company.
5. For Windows 95, go to Step 6.
For Windows NT, on the Select Installation Options window, select one of
the following options:
Manage NetRAID adapter(s) in this server only. (If you choose this
option, skip Step 6 and go on to Step 7.)
Manage NetRAID adapter(s) in this server and in other NT and
NetWare servers on the network. (If you choose this option, go on to
Step 6.)
6. For clients running Windows 95, select one or both of the following
utilities:
NetRAID Registration Server manages a list of HP NetRAID adapters.
NetRAID Assistant is the management utility.
For clients or servers running Windows NT, select one or more of the
following utilities to install:
NetRAID Registration Server manages a list of HP NetRAID adapters.
NetRAID Access Service allows server management over the network.
NetRAID Assistant is the management utility.
7. For the Destination Directory, type the path of the directory in which to
install the utilities on this client or server.
8. For Select Folder, accept the default or type the name of the folder in
which to install the utilities on this client or server.
Managing Servers Over the Network
83