HP D5970A - NetServer - LCII Installation Manual page 118

Chapter 12
List of Error Messages and Beep Error Messages
The HP NetServer Navigator CD-ROM contains HP NetServer Utilities:
At the HP NetServer Navigator Main Menu, select "Access NetServer
Utilities" to use the following tools:
HP DiagTools Utility: An easy-to-use hardware diagnostic for system
verification, burn-in, and rapid troubleshooting. DiagTools is a floppy-
disk based tool. When you select DiagTool from the utilities menu,
you are prompted to enter a floppy disk. DiagTools is then transferred
from the Navigator CD-ROM to the floppy.
Error Message Utility: Lets you view descriptions of errors that
occur during the Power-On Self Test (POST) and tells you how to
handle the errors.
Event Log Report Utility: Describes server management events and
lets you review a list of errors and other system events.
More NetServer Utilities>>Diskette Library : Enables you to
conveniently generate any flexible diskette available on the HP
NetServer Navigator CD-ROM. For example, you can create the
following diskettes: BIOS Update, NOS Drivers, and DiagTools.
For problems with hard disk drives, refer to the HP NetServer Hard Disk
Drive Troubleshooting Guide.
For problems with the network interface controller board (NIC), refer to
its documentation in Information Assistant.
For problems with the disk array controller board, if you have one, refer to
the HP NetRAID Series User Guide for HP NetRAID and HP NetRAID-1
in Information Assistant.
For problems with HP TopTools, refer to the HP TopTools Administrator
Guide on the HP Web Site at
http://www.hp.com/toptools .
For general information on management products, refer to
http://www.hp.com/go/netserver
and search for "management."
110
Troubleshooting