Hp Netraid Series Software; Overview; Step I. Decide Which Hp Netraid Drivers You Need - HP D5970A - NetServer - LCII Installation And Configuration Manual

6 HP NetRAID Series Software

Overview

In this chapter you will complete the next five steps in the installation:
In Step I, you choose whether you want to use I
HP NetRAID drivers
In Step J, you use the HP NetServer Navigator CD-ROM to prepare the
diskettes needed to install the NOS, HP NetRAID drivers, and the
HP NetRAID NOS-specific utilities
In Step K, you install the network operating system (NOS) if necessary
and the appropriate HP NetRAID drivers
In Step L, you install the NOS-specific configuration utility you need to
manage your HP NetRAID system
In Step M, you run optional configuration utilities
Step I. Decide Which HP NetRAID Drivers You
Need
Before you begin to install your software, you must decide which set of drivers
you need.
If you have an HP NetRAID adapter, you must install non-I
If you have an HP NetRAID-1 adapter, you must install non-I
If you have an HP NetRAID-3Si adapter, you have a choice. The HP
NetRAID-3Si adapter supports non-I
and supports I O drivers on some operating systems.
2
The data created using I
non-I O drivers.
2
This chapter contains complete instructions on installing non-I
are installing non-I
O drivers on all operating systems
2
O drivers is fully compatible with data created using
2
O drivers, see Step J next in this chapter.
2
O or non-I O
2 2
O drivers.
2
O drivers.
2
O drivers. If you
2
69