HP D5970A - NetServer - LCII Installation And Configuration Manual page 118

Chapter 9
Adapter
Configuration
Menu
Menu
Server
Selector
Physical
Drives
Figure 9-1. HP NetRAID Assistant Window
If HP NetRAID Assistant is started on a client or server that can access HP
NetRAID Series adapters over the network, you must select the server you want
to access. The HP NetRAID Assistant Main window has a Server pull-down list
next to the Adapter pull-down list.
When you select a server from the server selector box on HP NetRAID Assistant,
a window appears with the choice of access modes: Full Access and View Only.
Select one.
Full Access mode requires that authorized users enter a password. The
password is case-sensitive. The password must be given before full access
can be established to a server, and each server can require a unique
password. Full Access mode activates features that let you change the
adapter configuration and the states of physical and logical drives. Use it
to manage the HP NetRAID Series adapters in the server. For example, in
Full Access mode, you can initiate recovery from a disk failure, or make a
new hot spare.
View Only mode does not require a password, and does not permit users
to change the configuration. All menu selections that would change the
110
Managing Servers Over the Network
Physical Logical
Progress
Drive Drive
Menu
Menu Menu
Adapter Selector
Help
Menu
Toggle
Between
Views