Toshiba A20-S259 - Satellite - Pentium 4 2.66 GHz Maintenance Manual page 408

4.30 Fluorescent Lamp
Setting the bezel
1. Start installing the bezel in the upward direction until it stops at the top left corner.
NOTE: The GND-CU and lamp reflector on the left-hand side must not go beyond the
edges of the bezel.
Use care not to damage the cables and TAB.
The bezel latches must be engaged (there are five latches on the top edge, and two latches
on the bottom edge).
Satellite A20 Maintenance Manual (960-444)
Figure 4-147 Setting the bezel
4 Replacement Procedures
4-189