4.7 ODD
Installing the ODD
To install the ODD, follow the steps below and refer to figures 4-8 and 4-9.
1. Seat the plastic frame on the side of the ODD, and secure it with the following screws.
M2 3 SUPER FLAT screw
M2 5 SUPER FLAT screw
2. Slide the ODD and connect the drive to PJ1820 on the system board.
3. Secure the ODD with the following screws.
M2.5 4
Satellite A20 Maintenance Manual (960-444)
FLAT HEAD screw
4 Replacement Procedures
4
1
2
4-25