4 Replacement Procedures
6. Place the LCD panel (I) on the backlight unit (H).
NOTE: Make sure there is no dust between the LCD panel and backlight unit. If
any dust is found, remove it with crepe tape or others which has no remaining of
paste.
u n i t
(H) Backlight
Make
installed in the guide rib surely.
Figure 4-129 Replacing Sharp fluorescent lamp (SXGA+) (17)
4-172
(I ) LCD panel
sure
the
LCD
panel
Guide rib
Guide rib
is
Satellite A20 Maintenance Manual (960-444)
4.30 Fluorescent Lamp
Guide rib
Guide rib