4 Replacement Procedures
4.23 PC Card Slot
Removing the PC Card Slot
To remove the PC card slot, follow the steps below and refer to figure 4-33.
1. Lay the system board face up.
2. Remove the following screws securing the PC card slot.
M2 12 BIND screw
PC Card slot
3. Lay the system board face up.
4. Disconnect the PC card slot from PJ2110 on the system board.
4-60
Figure 4-33 Removing the PC card slot
4
M2 12 BIND screw
Satellite A20 Maintenance Manual (960-444)
4.23 PC Card Slot