Operational Features - Sony SRX-R220 Brochure

Operational Features

Color Space Conversion (CSC)
function
The SRX-R220 and SRX-R210 features a Color Space
Conversion (CSC) function, which helps users easily adjust
the projector's color space to that which is defined in the
DCI (Minimum D-Cinema Color Gamut) or ITU-R BT.709.
The target color gamut parameters required to display feature
exhiition or alternate content can be automatically calculated
from settings using the supplied SRX Controller software.
The internal test generator simplifies adjustment and lets the
operator align the projector in minutes
*A light meter is required for this adjustment and can be
obtained from a test equipment manufacturer.
12-bit SXRD Driver
The SRX-R220 and the SRX-R210 utilize a 12-bit imager
driver for reproducing extremely natural images.
Gamma Curve Selection
The SRX-R220 and the SRX-R210 provide three preset
gamma curve values. Users can select an optimum value
from 1.8, 2.2, and 2.6 according to the desired color tone
when displaying alternate content. A 2.6 gamma setting is
automatically selected by the system for feature exhibition.
Squeeze Mode Function
The SRX-R220 and SRX-R210 eliminate the need for an
external anamorphic lens. Due to the extremely high
resolution offered with the SXRD imager, signal processing
can be used to correct the geometric distortion of an
anamorphic image allowing automatic compensation
between images. Image aspect ratios can be identified in the
SMS timeline and automatically activate the squeeze function
if required to display any content.
6
Keystone Masking
To compensate for keystone distortion, which typically
occurs when the projector is not installed perpendicular to
the screen, the SRX-R220 and SRX-R210 offer an image-
masking function. Alignment through the projector software
allows users to set a two center screen points as well as four
corner points, which provides compensation for both flat and
curved screens.
Select four corner positions to mask the area outside the perimeter.
For curved screens, select two positions at the apex of the curve,
one at the top and one at the bottom of the screen.
Zoom/Focus Memory Function
The SRX-R220 and SRX-R210 are equipped with zoom and
focus memory functions that make it easy to switch the
projection between scope and flat aspect ratios.
Image size can be stored and instantly recalled via the SRX
Controller software or the screen management system
software. This allows for full-screen display regardless of the
aspect ratio. An electronic vertical alignment feature is
included in the same memory to compensate for vertical
changes in the image should the projector be mounted at a
downwards angle.
Masked area