1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projector
  5. SXRD SRX-S110
  6. Installation manual

Sony SRX-S110 Installation Manual

Srx-series 4k projector
Hide thumbs Also See for SRX-S110:
Table of Contents

Advertisement

Quick Links

See also: Manual

Advertisement

Table of Contents
loading

Related Manuals for Sony SRX-S110

Summary of Contents for Sony SRX-S110

  • Page 2: Table Of Contents

    Table of Contents 1. Preface ...............3 Appendix 2. Overview of the SRX-series Projectors A. Detailed Descriptions of the Input Boards 2-1. Configurations ..........4 A-1. LKRI-001 Analog input board ....34 2-2. Dimensions ..........6 A-2. LKRI-002 HD-SDI (4:2:2) input board ..35 2-3. Controls, indicators, and connectors..7 A-3.

  • Page 3: Preface

    To help simplify system installation, this guide provides useful information on selecting the right projector, lens, and input board models, as well as installation guidelines and much more. We hope it will serve as a useful reference in the system installation of Sony SRX-series projectors.

  • Page 4: Overview Of The Srx-Series Projectors

    The Sony SRX-series projector lineup consists of four models - SRX-S110, SRX-S105, SRX-R110, and SRX-R105 - for visualization, simulation, auditorium and post production. The SRX-S110 and SRX-S105 models - with one DVI input module pre-installed - exclusively have a 1080/60P display capability, making them ideally suited to high-end computer graphic-based projection applications. The SRX-R110 and SRX-R105 models scan as high as 1080/48P - with no input modules pre-installed - and are more suited to video-based projection applications.
  • Page 5 1 kW Xenon lamp house unit for replacement (for SRX-S105/R105)* LKRX-110 2 kW Xenon lamp bulb for replacement (for SRX-S110/R110) LKRX-B110 2 kW Xenon lamp house unit for replacement (for SRX-S110/R110)* LKRA-001 8-inch exhaust duct adaptor *Lamp house units include Xenon lamp bulb.

  • Page 6: Dimensions

    2-2. Dimensions Front Side Center of lens 740 (29 1/4) 357 (14 1/8) 383 (15 1/8) 102 (4 1/8) 1,116 (44) 108 (4 3/8) 30 (1 1/16) 440 (17 3/8) Center of gravity ▲ ▲ Center of lens 194 (7 3/4) 201 (8) Center of 700 (27 5/8)

  • Page 7: Controls, Indicators, And Connectors

    Ethernet connector (10Base-T/100Base-TX) RS-232C connector (D-sub 9-pin, female) Input board attachment parts: Optional boards can be installed here. The SRX-S110/S105 is equipped with DVI-D connector and AUX connector, and three available slots here. The SRX-R110/R105 has four available slots here.

  • Page 8: Available Display Modes

    2-4. Available display modes The SRX-series projectors can display images in the following modes. The displayed image on the screen varies by input signals as illustrated below. ■ When projecting a 4,096-pixel (4K x 2K) image with the maximum horizontal picture elements 4,096 pixel ■...
  • Page 9 Overview of the SRX-series Projectors As each image format is scanned within the projector, certain pixels are used to fill the screen. This means careful consideration needs to be used in order to select the proper lens. The mapping of each image format to the SXRD imager is shown below.

  • Page 10: Selection Of Lens

    Selection of Lens It is important to select a lens that is appropriate to the screen width that will be used, the size of the room where the projector will be installed, and the aspect ratio of the displayed image. The matrix charts below provide a guideline on which lens is most appropriate.
  • Page 11 Selection of Lens For 16:9 aspect display Zoom lenses (mm) Screen Width 4,500 6,000 8,000 10,000 12,000 16,000 LKRL-Z115 L (min) 7,001 9,373 12,537 15,700 18,863 25,190 L (max) 8,600 11,505 15,379 19,253 23,127 30,874 LKRL-Z117* L (min) 8,430 11,140 14,760 18,370 21,990...

  • Page 12: Selection Of Projector Model

    Selection of Projector Model This section offers a simple two-step guide to selecting the most appropriate projector model. Step-1 First, calculate the required luminance of the projector using two parameters: the screen width and the screen gain that will be used. Note that the values in the chart below were calculated in consideration of the fact that the luminance of projection lamp bulbs tends to deteriorate over time.
  • Page 13 For installation, a pedestal which is equipped with a six-axis adjustment mechanism, and has sufficient frame rigidity is necessary. (Sony does not offer any pedestal for this.) Please note that the double-stack configuration may cause the image quality to be reduced.

  • Page 14: Selection Of Input Board

    The SRX-series projectors are equipped with several input board slots that users can fill with a mixture of the following input modules. On the SRX-S110 and SRX-S105 models, one DVI input board is pre-installed and three slots are available for the installation of input modules.
  • Page 15 Selection of Input Modules Available signals and connectors on each board SRX-S110/SRX-S105 SRX-R110/SRX-R105 LKRI-001 BNC x 5, HD/SD analog video input, RGB or Y/Cb/Cr selectable Analog input board Computer signals 0.7 Vp-p ±2 dB positive, 75 Ω 0.7 Vp-p ±2 dB positive, 75 Ω...

  • Page 16: Installation Requirements

    Installation Requirements Please make sure to follow these guidelines when designing the facility and operating the projector system. 6-1. Environmental guidelines On installation • Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces such as rugs and blankets or near materials such as curtains and draperies that may block the ventilation holes.

  • Page 17: Placement

    Installation Requirements 6-2. Placement • Install the projector on the floor (Fig. 1) or mount it to the ceiling. Any other installation may cause a malfunction such as color irregularity or a reduction in lamp life. • Do not install the projector upside down. (Fig. 2) •...
  • Page 18 • There is an extreme amount of vertical lens shift available in this design. If the projector is installed so that the center of the lens is anywhere within the vertical height of the screen, there will be enough range to ensure the projector will not need to be tilted.

  • Page 19: Electrical Power Requirements

    • Use an AC power cord that supports 8AWG, 250 V, 40 A or higher. • Use a three-wire power cord to the AC IN terminal on the projector. • For SRX-S110/R110, a 30 ampere circuit breaker is required in the distribution board. - Do not use a twin 20 amp service •...

  • Page 20: Operating Temperature Control And Venting

    6-4. Operating temperature control and venting Operating temperature To achieve optimum performance when operating the projector, proper temperature control is required. Two ways to ensure proper operating temperature are: 1. Maintain the ambient temperature (as indicated in the specifications below) by using an air-conditioning system installed in the room.
  • Page 21 To use this adaptor, a heat extractor and a blower capable of exhausting air are also required. Model name Air flow requirements SRX-S110/R110 13.7 to 15.6 cube meters/min (450 to 550 cube feet/min) SRX-S105/R105 13.7 to 15.6 cube meters/min (450 to 550 cube feet/min)
  • Page 22 1,320 (52) 1,374 (54 1/8) 1,224 (48 1/4) Without LKRA-001 700 (27 5/8) 1,320 (52) Unit: mm (inches) With LKRA-001 LKRA-001 (replaced with a fan cover) SRX-series 4K Projector - System Installation Guide...

  • Page 23: Connecting The Projector

    • Before connection, it is required to set the DIP switch at the bottom of INPUT A (for SRX-S110/S105 only) or the LKRI-004 input board depending on the type of input signal from the connected computer. See the next page.
  • Page 24 2,048 x 1,080* 148.50 –** * The signals are Sony’s unique formats. ** When the projector is connected with a computer incompatible with DDC (Display Data Channel), the projector can receive the above signals regardless of the signals being EDID ROM compatible/incompatible.

  • Page 25: Analog Rgb

    Connecting the Projector Analog RGB With the analog component input connector provided on the optional LKRI-001 board, the projector can be connected to a computer equipped with an analog RGB output. Notes DVI-D Select “RGB” in “Signal Mode” of “Input Source” in the PICTURE CONTROL window of the SRX Controller software.

  • Page 26: Component/Video Gbr

    Component/Video GBR With the analog component connectors provided on the optional LKRI-001 board, the projector can be connected to any video devices equipped with analog component connectors such as an analog Betacam™, a DVD recorder/player, or a high-definition video device equipped with video GBR connectors.

  • Page 27: Compatible Formats And Standards

    Connecting the Projector 7-3. Compatible formats and standards Please see the table below to confirm the input option you are selecting works with the signal format you intend to use. SRX-R110/R105 SRX-S110/S105 Signal Aspect Signal Pixel count Standard format ratio...

  • Page 28: How To Control The Projector

    How to control the projector 8-1. Overview There are three types of controls available for the projectors. 1. RS-232C (including the method using the supplied SRX Controller software) 2. Ethernet (including the method using the supplied SRX Controller software) 3. Supplied IR Remote Commander unit 8-2.

  • Page 29: Projector Commands

    How to control the projector 8-4. Projector commands List of functions to be controlled or adjusted via a controller Item Description Picture Mode Relationship between Screen and Input is as follows. Screen 1-screen (1 picture) mode: an input is allocated to Screen Control all screens 1 to 4 (e.g.

  • Page 30: Supplied Srx Controller Software

    8-5. Supplied SRX Controller Software The SRX-Series projectors come equipped with the SRX Controller software and its intuitive GUIs allow easy setup and adjustments using a PC. The projectors can be controlled through either Ethernet or RS-232C interfaces, and multiple projectors can be controlled from a single PC (when using the Ethernet connection). A comprehensive range of setup parameters including input configurations, colorimetry controls, installation adjustments and maintenance settings can be controlled via the software.

  • Page 31: Supplied Remote Commander Unit

    How to control the projector System requirements for the SRX Controller software • Intel Pentium Processor at 1 GHz or faster ® • 64 MB of RAM or more • CD drive at 8x of faster • Monitor with 800 x 600 resolution or greater •...
  • Page 32 SRX-series 4K Projector - System Installation Guide...

  • Page 33: Appendix

    Overview of the SRX-series Projectors Appendix...

  • Page 34: Detailed Descriptions Of The Input Boards

    Appendix Detailed Descriptions of the Input Boards A-1. LKRI-001: Analog input board The LKRI-001 Analog Input Board utilizes five BNC connectors that can accept 0.7 volt analog signal levels as RGB sync on G, RGBHV or YUV formats. With this board SRX-series projectors can accept HD and SD analog component video signals, and computer signals of XGA (1,024 x 768), SXGA (1,280 x 1,024) and UXGA (1,600 x 1,200).

  • Page 35: A-2. Lkri-002 Hd-Sdi (4:2:2) Input Board

    Appendix A-2. LKRI-002: HD-SDI (4:2:2) input board With the LKRI-002 board SRX-series projectors can accept both SMPTE 259M SD digital 525/625 line video and SMPTE 292M 1,080 4:2:2 YUV serial picture data. Upon detecting the frequency of the input signal, switching is automatic.

  • Page 36: A-3. Lkri-003 Dual-Link Hd-Sdi Input Board

    Appendix A- 3. LKRI-003: Dual-link HD-SDI input board The LKRI-003 board accepts the signals described in the chart below. This board automatically detects the input signal and determines if it is dual-link or single-link, and DC-SDI or HD-SDI. As with four LKRI-002 boards, the projector can display a 4K image using four LKRI-003 boards. 23.98PsF 24PsF (Real...

  • Page 37: A-4. Lkri-004 Dvi Interface Board

    It is one fourth of a 4K image. 9)-11) SMPTE 24P signals commonly used for a post-production and cinema applications. The following chart provides information on the signal formats that can be handled, and on the format differences between the SRX-S110/S105 and SRX-R110/R105 models. Resolution SRX-S110/S105...
  • Page 38 DVI-D (Input DVI) connector (24-pin DVI connector) Used to input progressive DVI signals. AUX (Input extension) connector (24-pin DVI connector) Used for input extension. For details on connecting devices, please consult your nearest Sony office. Pin assignment of DVI connector Pin number Signal name...

  • Page 39: Detailed Descriptions Of Lens Throw Distances

    Appendix Detailed Descriptions of Lens Throw Distances B-1. Overview This section provides the throw distances (the distance between the lens and the screen) for all lens models. Throw distances depend on the lens used, the type of input signal, and/or the size and shape of the projected image. In the charts on the following pages, abbreviations represent each parameter.

  • Page 40: B-2. Lkrl-Z115 Lens

    Appendix B-2. LKRL-Z115 lens For full-screen display 5,000 6,000 7,000 8,000 9,000 10,000 12,000 14,000 16,000 Screen width inches 2,637 3,164 3,691 4,219 4,746 5,273 6,328 7,383 8,438 Screen height inches 5,653 6,783 7,914 9,044 10,175 11,305 13,566 15,827 18,088 Diagonal inches distance...

  • Page 41: B-3. Lkrl-Z117 Lens

    Appendix B-3. LKRL-Z117 lens For full-screen display 4,500 5,000 6,000 7,000 8,000 9,000 10,000 12,000 14,000 16,000 Screen width inches 2,373 2,637 3,164 3,691 4,219 4,746 5,273 6,328 7,383 8,438 Screen height inches 5,087 5,653 6,783 7,914 9,044 10,175 11,305 13,566 15,827 18,088...

  • Page 42: B-4. Lkrl-Z119 Lens

    Appendix B-4. LKRL-Z119 lens For full-screen display 4,500 5,000 6,000 7,000 8,000 9,000 10,000 12,000 14,000 16,000 Screen width inches 2,373 2,637 3,164 3,691 4,219 4,746 5,273 6,328 7,383 8,438 Screen height inches 5,087 5,653 6,783 7,914 9,044 10,175 11,305 13,566 15,827 18,088...

  • Page 43: B-5. Lkrl-Z122 Lens

    Appendix B-5. LKRL-Z122 lens For full-screen display 4,500 5,000 6,000 7,000 8,000 9,000 10,000 12,000 14,000 16,000 Screen width inches 2,373 2,637 3,164 3,691 4,219 4,746 5,273 6,328 7,383 8,438 Screen height inches 5,087 5,653 6,783 7,914 9,044 10,175 11,305 13,566 15,827 18,088...

  • Page 44: B-6. Lkrl-Z140 Lens

    Appendix B-6. LKRL-Z140 lens For full-screen display 5,000 6,000 7,000 8,000 9,000 10,000 Screen width inches 2,637 3,164 3,691 4,219 4,746 5,273 Screen height inches 5,653 6,783 7,914 9,044 10,175 11,305 Diagonal inches distance 18,792 22,502 26,212 29,922 33,632 37,342 L (min) 1,470 inches...

  • Page 45: B-7. Lkrl-90 Lens

    Appendix B-7. LKRL-90 lens For full-screen display 4,500 5,000 6,000 7,000 8,000 9,000 10000 12,000 14,000 16,000 Screen width inches 2,373 2,637 3,164 3,691 4,219 4,746 5273 6,328 7,383 8,438 Screen height inches 5,087 5,653 6,783 7,914 9,044 10,175 11305 13,566 15,827 18,088...

  • Page 46: Displayed Image Size In Multiple Screen Mode

    Appendix Displayed Image Size in Multiple Screen Mode Screen Full screen Dual screen Quad screen mode Type of Horizontal size Vertical size Horizontal size Vertical size Horizontal size Vertical size signal VIDEO60 2,880 2,156 2,003 1,499 1,440 1,078 VIDEO50 2,880 2,146 2,003 1,504...

  • Page 47: Brief Maintenance Information

    Appendix Brief Maintenance Information The following list shows the basic guidelines for maintenance. For more details, please refer to the service manual. Periodic replacement/periodic check/cleaning SRX-R105/S105 Time required Time required Part name 1,000 2,000 3,000 4,000 5,000 6,000 10,000 15,000 20,000 Check points for check for replacement...

  • Page 48: Preset Signals

    Appendix Preset Signals Signal number fH [kHz] fV [Hz] Aspect Horizontal sampling Vertical sampling NO INPUT VIDEO60 (480_60i) 15.73 59.94 1,280 VIDEO50 (575_50i) 15.63 50.00 1,280 HDTV (1,080_60i) 33.75 60.00 16:9 1,920 1,080 1,024 x 768_VESA60 48.36 60.00 1,024 1,024 x 768_VESA70 56.48 70.07 1,024...

  • Page 49: Specifications

    Alignment layer Inorganic Thin Film 0.35 µm MOS process Backplane process Less than 2 µm Liquid crystal cell gap SRX-S110 / SRX-S105 SRX-R110 / SRX-R105 Optical Projection system 3-SXRD panel, prism color integrated system SXRD, 1.55-inch (diagonal), 4,096(H) x 2,160(V) pixels...
  • Page 50 Appendix SRX-S110 / SRX-S105 SRX-R110 / SRX-R105 Input Boards BNC x 5, HD/SD analog video input, RGB/Y, Cb, Cr selectable Computer signals 0.7 Vp-p ±2 dB positive, 75 Ω 0.7 Vp-p ±2 dB positive, 75 Ω 0.7 Vp-p ±2 dB positive, 75 Ω...
  • Page 51 Appendix...
  • Page 52 Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. All non-metric weights and measures are approximate. Sony, Betacam, HDCAM, Remote Commander, SXRD and the SXRD logo are trademarks of Sony Corporation. Windows is a registered trademark of Microsoft Corporation.

This manual is also suitable for:

Srx-r110Srx-r105Srx-s105

Table of Contents