Sony SVT-3000 Service Manual page 88

C39)
1.
1)
a)
))
4)
COMPL CLUTCH (See Fig. 7-7-24.)
Removal
Remove the COMPL CASSETTE MECHANISM as
instructed in P.101.
Remove the PULLEY BRACKET, the REEL DRIVE
BELT and the REEL PULLEY as instructed in
P.123.
Remove the screw @, then remove the CQMPL
MC-4 @.
Remove the two screws ©, then remove the
COMPL CLUTCH @.
@Screw
rN {rela} iaMmated(:)
®Aligning Protub
DV
2)
<))
4)
Remounting
Mount the COMPL CLUTCH @ with the two
screws ©, aligning it with the protuberance ©.
After inserting the CN831 (COMPL MC-4) into
the CN801 (COMPL MC-1), mount the COMPL
MC-4 with the screw @.
Mount the REEL PULLEY, the REEL ORIVE BELT
and the PULLEY BRACKET as instructed in
P.123.
Mount the COMPL CASSETTE MECHANISM as
instructed in P.101.
Oe
@Comp!l MC-4
Note: The form of ICN801 and CN 831 differ from the
former that.
Fig. 7-7-24. Compl Clutch
— 1384 —