Advertisement
(3) TENSION
LEVER
ASS'Y
AND
BAND
HOLDER
ASSY
(See Fig. 7-7-18)
1.
Removal
1)
Remove the CASSETTE
HOLDER MECHANISM
as
instructed
in P.101.
2) Remove the SPRING COIL ©.
3) Remove the screw @ and washer @ fixing the
BAND BRAKE BRACKET ASS'Y @.
Push the SUB SUPPLY BRAKE @ in the direction
of the arrow, setting the BAND BRAKE BRACKET
ASS'Y ©@ free.
5) Open the hook © a little and remove the TENSION
LEVER ASS'Y ©. Take care not to open the hook
@ too much, otherwise it may be deformed or
broken.
6) Remove
the hook
@ of the
BAND
BRAKE
BRACKET ASS'Y.
7) Remove the fixing washer @ and then remove the
SPRING COIL
@ and the BAND LEVER ASS'Y @.
—
4
—
@ Screw
wn
® Fixing Washer
IS
@ Spring Coil
@ Brake Band
Lever Ass'y
® Spring Coil Holding
Hole
@ Sub Supply Brake
2
3
4
)
6
7
—
Remounting
Mount the SPRING COIL @ and the BRAKE BAND
LEVER ASS'Y @ to the
axle (21) with the fixing
washer (9, inserting the both ends of the SPRING
- COIL @ into the SPRING COIL holding holes @
~~
—
Elite aD
Mount the BAND BRAKE BRACKET ASS'Y hook
@ into the TENSION
LEVER ASS'Y hole ©.
Insert the TENSION LEVER ASS'Y axle © into the
rel E-F=yefom of-Y-Talaye Mate) (MCL) M-late Mero)ani/qutMm cal-] Mi Uu-Mulee).<
(ON em tere) cc
While pushing the SUB SUPPLY BRAKE @ in the
direction
of arrow
A, wind the BAND
BRAKE
BRACKET
ASS'Y
@ around
the side of the
- SUPPLY REEL ASS'Y @.
)
)
Mount the BAND
BRAKE
BRACKET ASS'Y @ to
the BRAKE BAND LEVER ASS'Y @ with the screw
® through the washer @.
Hook the SPRING COIL @ between the hooks @
and @.
Perform
TENSION
POLE
position
adjustment
as
instructed
in 7-3 (P.85).
Mount
the CASSETTE
HOLDER
MECHANISM
as
instructed
in
P.101.
@ Hook @ Band Brake Braket Ass'y
N
TENSION
POLE
@ Plastic
Bearing
OWN)
® Spring Coil Holding
Hole
@ Supply Reel Ass'y
Fig. 7-7-18.
Tension Lever Ass'y & Band Holder Ass'y
Advertisement
