Selecting further settings
Setting up Miele@home again
If you have changed your Wi-Fi
network, you can set up Miele@home
again for your wine conditioning unit.
In Settings mode , use the
and sensors to select
and touch OK to confirm your
selection.
Use the and sensors to select
Set up again
and confirm your
selection with OK.
Reset configuration?
display.
Use the and sensors to select
Yes
or
No
and confirm your selection
with OK.
Resetting the network configuration
Reset the settings to the default
settings when disposing of your wine
conditioning unit, selling it, or putting
a used wine conditioning unit into
operation. This will reset the network
configuration so that all personal data
is deleted from the wine conditioning
unit. This will also ensure that a
previous owner is no longer able to
access the wine conditioning unit.
Reset the settings of the wine
conditioning unit as described in the
chapter "Resetting the settings to
their factory default settings ".
70
Miele@home
will appear in the
Switching off Demo mode
Demo mode allows the wine
conditioning unit to be presented in
the showroom without the cooling
system being switched on. Do not
activate this setting for domestic use.
If Demo mode has been switched on
at the factory, will appear in the
display.
In Settings mode , use the
and sensors to select
and touch OK to confirm your
selection.
Press OK for 4 seconds to deactivate
appears in the display.
Follow the instructions in the display.
The countdown
Demo mode will
deactivate in seconds
display.
Demo mode deactivated. Appliance cooling
switched on
appears in the display.
Confirm the message with OK.
The main screen will appear in the
display.
Demo mode
will appear in the