Electrical Connection - Miele KWT 2662 ViS Operating And Installation Instructions

Electrical connection

The wine conditioning unit must only be
connected to an earthed socket using
the mains connection cable supplied.
The socket should be easily accessible
after the wine conditioning unit has
been installed. If the socket is not easily
accessible, ensure that a suitable
means of disconnection is provided on
the installation side for each pole.

Risk of fire from overheating.
Connecting the wine conditioning
unit to a multi-socket adapter or to
an extension lead can overload the
mains connection cable.
For safety reasons, do not use an
extension cable or multi-socket
adapter.
All electrical work must be carried out
by a suitably qualified and competent
person in strict accordance with
national and local safety regulations.
For extra safety, it is advisable to install
a suitable residual current device (RCD)
with a trip current of 30 mA. Ensure
power is not supplied to the appliance
until after the installation has been
completed.
If the mains connection cable is
damaged, it must only be replaced with
a specific mains connection cable of
the same type (available from Miele).
For safety reasons, such replacement
may only be carried out by a suitably
qualified and competent electrician or a
Miele authorised service technician, in
order to avoid a hazard.
The data plate indicates the nominal
power consumption and the connection
data. Compare this information with the
data of the on-site electrical
connection.
If in any doubt, consult a qualified
electrician.
Temporary or permanent operation with
a self-sufficient or non-mains
synchronous energy supply system
(e.g. isolated networks, back-up
systems) is possible. A requirement for
the operation is that the energy supply
system complies with all current local
and national requirements that apply to
stand-alone, solar and/or battery
systems.
The protective measures provided in
the domestic installation and in this
Miele product must also be assured in
their function and operation in isolated
operation or in non-mains synchronous
operation, or replaced with equivalent
measures in the installation.
Connecting the wine conditioning
unit
Installation
49