Installing the wine conditioning
unit
Before you start ...
It is essential to read these operating
and installation instructions carefully
before starting to install the wine
conditioning unit.
The wine conditioning unit should be
installed by a suitably qualified
installer in accordance with these
operating and installation
instructions. Safe operation of the
wine conditioning unit is only
assured if it has been installed and
connected in accordance with these
operating and installation
instructions.
Risk of damage and injury from
the wine conditioning unit tipping
over.
The wine conditioning unit is very
heavy and can tip forwards when the
appliance door is open.
Keep the appliance door shut until
the wine conditioning unit has been
built in and secured in its building-in
niche in accordance with these
operating and installation
instructions.
Due to its weight and size, the wine
conditioning unit must be installed
by two people.
Tools required
- Cordless drill
- TX 20 screwdriver
- Hammer drill
- Drill bits in various sizes, depending
on materials
- Hammer
- Open-end spanner
- Ratchet wrench, attachment: 8 mm
socket
- Adhesive tape
- Utility knife
- Pipe wrench
- Spirit level
- Tape measure
- Pencil
- Try square
Other
- Step ladder
- Hand trolley
Installation
25