Bypassing Plug-Ins; Resetting Faders, Sends, & Panpots; Navigating The Edit Window - Yamaha 02R96 Owner's Manual

214
Chapter 18—Pro Tools Remote Layer

Bypassing Plug-ins

Plug-ins can be bypassed as follows.
(Make sure the EFFECTS/PLUG-INS [4] (INSERT/PARAM) button indicator is not lit
before proceeding.)
Press the EFFECTS PLUG-INS [CHANNEL INSERTS] button.
1
Its indicator lights up and the [SEL] buttons are set to Insert Select mode.
Use the [SEL] buttons to select plug-ins.
2
3 While holding down the EFFECTS/PLUG-INS [3] (BYPASS) button, use
Parameter control 1–4 push switches to bypass the plug-ins.
To bypass plug-in #5, press the Parameter Down (SCROLL >) button, and then perform
step 3. Press the Parameter Up (< SCROLL) button to view plug-ins 1–4 again.
The titles of bypassed plug-ins are displayed in uppercase characters. For example, the title
of the plug in "D-Verb" appears as "d-verb" when it's not bypassed, and appears as
"D-VERB" when it is bypassed.
Resetting Faders, Sends, & Panpots
Faders, panpots, and sends can be reset to their default values as follows. For faders and send
controls, this is "0." For panpots, it's center.
Make sure that the EFFECTS PLUG-INS [CHANNEL INSERTS] button indicator is off
before proceeding with these shortcuts.
To do this...
Reset a channel fader
Reset a channel panpot
Reset a channel send level
While the EFFECTS PLUG-INS [PLUG-INS] (DEFAULT) button is being pressed, its indi-
cator flashes and "DFLT" appears in the SELECT ASSIGN section of the display.
Grouped channels are reset together.

Navigating the Edit Window

The cursor buttons can be used to navigate the Edit window as follows.
Use the [INC] (CURSOR MODE) button to select Navigation cursor mode.
1
The CURSOR MODE section of the display shows "NAVIGATION."
To move the edit cursor to the previous region boundary, or to the previous
2
marker, press the Left cursor button.
3 To move the edit cursor to the next region boundary, or to the next marker,
press the Right cursor button.
4 To select the track above, press the Up cursor button.
To select the track below, press the Down cursor button.
5
02R96 Version 2—Owner's Manual
Do this!
EFFECTS PLUG-INS [PLUG-INS]+[SEL]
[PAN], EFFECTS PLUG-INS [PLUG-INS]+[ENCODER push]
AUX SELECT [AUX 1]–[AUX 5], EFFECTS PLUG-INS
[PLUG-INS]+[ENCODER push]