Yamaha 02R96 Owner's Manual page 261

MOD. DELAY
One input, two output basic repeat delay with modulation.
Parameter Range
DELAY 0.0–2725.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine/Tri
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
SYNC OFF/ON
1
DLY.NOTE
2
MOD.NOTE
1.
setting)
2.
DELAY LCR
One input, two output 3-tap delay (left, center, right).
Range
Parameter
DELAY L 0.0–2730.0 ms
DELAY C 0.0–2730.0 ms
DELAY R 0.0–2730.0 ms
FB. DLY 0.0–2730.0 ms
LEVEL L –100 to +100%
LEVEL C –100 to +100%
LEVEL R –100 to +100%
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
HPF THRU, 21.2 Hz–8.00 kHz
LPF 50.0 Hz–16.0 kHz, THRU
SYNC OFF/ON
1
NOTE L
NOTE C 1
NOTE R 1
NOTE FB
1
1.
setting)
Description
Delay time
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Modulation waveform
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY
Used in conjunction with TEMPO to determine FREQ
(Maximum value depends on the tempo
Description
Left channel delay time
Center channel delay time
Right channel delay time
Feedback delay time
Left channel delay level
Center channel delay level
Right channel delay level
Feedback gain (plus values for normal-phase feedback, minus val-
ues for reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY L
Used in conjunction with TEMPO to determine DELAY C
Used in conjunction with TEMPO to determine DELAY R
Used in conjunction with TEMPO to determine FB. DLY
(Maximum value depends on the tempo
261
Effects Parameters
02R96 Version 2—Owner's Manual