Yamaha 02R96 Owner's Manual page 39

Analog Master I/O Section
A
STUDIO MONITOR OUT +4 dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal output
level +4 dB, output the analog Studio Monitor signal for
monitoring in the actual studio. The source, which is
selected by using the STUDIO buttons in the MONITOR
section, can be Aux Send #7, Aux Send #8, the Stereo Out, or Control Room. The output
level is controlled by the STUDIO LEVEL control. See "Studio Monitoring" on page 137 for
more information.
B
STEREO OUT +4 dB (BAL)
These balanced XLR-3-32-type connectors, nomi-
nal output level +4 dB, output the analog Stereo
Out signal and are typically connected the stereo
inputs of a 2-track recorder. They are wired pin
1–ground, pin 2–hot (+), and pin 3–cold (–). See "Stereo Out Connectors" on page 92.
C
2TR IN ANALOG 1 +4 dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal input
level +4 dB, are typically used to connect the analog stereo
outputs of a 2-track recorder. Signals connected here can
be monitored via the CONTROL ROOM MONITOR
OUT by pressing the CONTROL ROOM [2TR A1] button. In addition, these inputs can be
patched to Input Channels or Insert Ins. See "2TR Analog INs" on page 54.
D
CONTROL ROOM MONITOR OUT +4 dB (BAL)
These balanced 1/4-inch TRS phone jacks, nominal output
level +4 dB, output the analog Control Room Monitor sig-
nal and are typically used to feed the control room's main
monitors. See "Control Room Monitoring" on page 136
for more information.
E
STEREO OUT –10 dBV (UNBAL)
These unbalanced phono connectors, nominal output level
–10 dBV, output the analog Stereo Out signal and are typically
connected to the stereo inputs of a 2-track recorder. See "Stereo
Out Connectors" on page 92.
F
2TR IN ANALOG 2 –10 dBV (UNBAL)
These unbalanced phono connectors, nominal input level
–10 dBV, are typically used to connect the analog stereo outputs
of a 2-track recorder. Signals connected here can be monitored
via the CONTROL ROOM MONITOR OUTs by pressing the
CONTROL ROOM [2TR A2] button. In addition, these inputs can be patched to Input
Channels or Insert Ins. See "2TR Analog INs" on page 54.
1 2 3
4 5 6
Female XLR plug
02R96 Version 2—Owner's Manual
39
Rear Panel
Tip (hot)
1/4" TRS phone plug Ring (cold)
Sleeve (ground)
2 (hot)
3 (cold)
1 (ground)
Tip (hot)
1/4" TRS phone plug Ring (cold)
Sleeve (ground)
Tip (hot)
1/4" TRS phone plug Ring (cold)
Sleeve (ground)
Phono plug Tip (hot)
Sleeve (ground)
Tip (hot)
Phono plug
Sleeve (ground)