Operating Conditions - Siemens SINUMERIK 840D sl Equipment Manual

Type of condition
Ambient temperature
Biological environmental condi‐
tions
Chemically active environmental
conditions
Mechanical environmental condi‐
tions
Maximum permissible tempera‐
ture change
Relative humidity (without conden‐
sation)
Precipitation, rain
Water other than rain
Height
Condensation, splash water,
icing, salt spray
1) Mold growth, slime, animal pests, rodents, termites and other animal vermin are not permissible.
2) In marine- and weather-resistant transport packaging (container).
3) Product packaging (storage packaging) is an individual packaging for storage and does not satisfy the
requirements for transport. As a consequence, product packaging is therefore not suitable for shipping.
4) For storage in the product packaging.
Note
Remove the transport protective foil and packaging material before installing the components.
4.1.2.2

Operating conditions

The components of the SINUMERIK 840D sl system are intended for a weatherproof, fixed
location. The documented
environmental conditions apply to the climate in the immediate vicinity of the units and to the
entry of the cooling air. They exceed the requirements according to EN 60204-1, EN 61800-2,
EN 61131-2 and IEC 62477-1.
NOTICE
Damage to components by coolants and lubricants
The SINUMERIK operator components have been designed for industrial use, particularly on
machine tools and production machines. This also takes into account the use of commercially
available coolants and lubricants. The use of aggressive compounds and additives can damage
components and result in their failure.
Contact between the operator components and coolants and lubricants should be avoided as
far as possible, as resistance to all coolants and lubricants cannot be guaranteed.
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA
General information and networking
Permissible range/class
-20 °C ... +55 °C
Class 1M2 according to EN 60721-3-1, in product packaging
Not permissible
Not permissible
Max. 4,000 m above sea level
Not permissible
4.1 Application planning
1B1
1)
1C2
2)
30 k/h
5 to 95%
4)
4)
3)
27