Connection Module Basic Pn - Siemens SINUMERIK 840D sl Equipment Manual

Note
The PFH
quantitative conditions specified here (e.g. operating period) are observed. Mechanical
switches such as the acknowledgment button are subject to wear due to use.
The wear-related service life should be determined on the basis of typical operating actions and,
if possible, compared with values obtained in practice.
10.2

Connection module Basic PN

Safety
Safety class
Degree of protection accord‐
ing to EN 60529
Approvals
Electrical data
Input voltage
Current carrying capacity
Max. power consumption
Max. total
power consumption
Mechanical data
Dimensions
Weight
Fall height, max.
Note
Information about the climatic and mechanical environmental conditions is contained in the
associated section under:
"General notes and interconnection" → "Operational planning".
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA
value only applies if the technical properties of the acknowledgment button and the
d
Enabling button contacts (X20 connector)
Emergency stop button contacts (X21 con‐
nector)
Connection module without external load‐
ing
Panel (HT 8)
3 status signals (X7 and X21)
Total (with HT 8, 3 status signals):
Height (without holder for termi‐
III according to IEC 60536
CE / cULus
24 VDC (via X3 connector)
56.4 W
nating connector):
66 mm
0.75 kg
1.20 m
Technical specifications
10.2 Connection module Basic PN
IP54
max. each 0.5 A / 2-chan‐
nel
max. each 0.5 A / 2-chan‐
nel
0.3 A
0.85 A
1.5 A (load-dependent
max. each 0.5 A)
2.35 A
Width:
165 mm
Length:
166 mm
133