Connecting; Pin Assignment Of The Interfaces - Siemens SINUMERIK 840D sl Equipment Manual

4.2

Connecting

4.2.1

Pin assignment of the interfaces

The pins of the component interfaces are assigned as specified in the tables below. Any
deviations are indicated at the relevant point.
Signal type:
I
O
B
V
-
Power supply X206
Connector designation:
Connector type:
Cable cross-section:
Total cable length:
X203, X204 and X213 USB interfaces
The USB interfaces are implemented as sockets and comply with the generally valid standard.
The version information (1.1, 2.0 etc.), the maximum velocity (low speed, full speed, etc.) and
the socket type (A or B) are documented in the individual sections for the associated devices.
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA
Input
Output
Bidirectional (inputs/outputs)
Power supply
Ground (reference potential) or N.C. (not connected)
Pin Name
1 P24 (+)
2 M24 (-)
3 Functional earth
General information and networking
X206
3-pin Combicon connector
0.5 - 2.5 mm
2
30 m
Type Meaning
V/V/- 24 VDC potential (20.4 to 28.8 VDC)
0 V
Connection for grounding the housing
4.2 Connecting
33