Motorola iDEN i930 Field Service Manual page 54

14. Scroll down to highlight IMEI/SIM ID, and then press View to view the IMEI/SIM ID
display. The IMEI is the global name assigned to the mobile station at manufacturing time and
should correspond to the serial-number tag of the unit. The SIM ID is the SIM electronic serial
number and should correspond with the number stamped on the SIM card.
15. Press Back to return to the Trace Mode display.
16. Scroll down to highlight Registration Log, and then press View to view the Registration Log
display. This screen displays the Dispatch Log, Interconnect Log, Packet Data Log, Mobile IP
Log, and Phone Rst Log. Registration Log information is updated when the user deselects and
selects the Registr Log choice.
17. Press Back to return to the Trace Mode display.
18. By selecting More, or Option 9, you can highlight Err/Chan Codes, and then press On to
view the Err/Chan Codes display. This screen displays the physical channel that the unit is
connected to or the radio link procedure that is currently active. Also, displays error codes of
errors encountered during normal operation if Err/Chan codes is On. (At power up, Err/Chan
Codes is Off)
19. Press Back to return to the Trace Mode display.
20. Scroll down to highlight Current Freq, and then press View to view the Current Freq display,
which shows the current frequency and band.
21. Press Back to return to the Trace Mode display.
22. Scroll down to highlight Dispatch IDs, and then press View to view the Dispatch IDs display.
This screen displays the dispatch group id affiliated with the unit in the current dispatch-
location area. Also, displays the dispatch individual id affiliated with the unit in the current
dispatch location.
23. Press Back to return to the Trace Mode display.
24. Scroll down to highlight Band Info, and then press View to view the Band Info display. This
screen displays the primary and secondary control channels: Pri Band: 02 for 800 MHz; Sec
Band: 02 for 800 MHz and 04 for 900 MHz.
25. Press Back to return to the Trace Mode display.
26. Scroll down to highlight Bandmap, and then press View to view the Bandmap display. This
screen displays the currently selected regional bandmap.
27. Press Back to return to the Trace Mode display.
28. Scroll down to highlight Hardware, and then press View to view the Hardware display. This
screen displays AFC Offset and Channel Number.
29. Press Back to return to the Trace Mode display.
30. Scroll down to highlight Fatal Err/#, and then press View to view the Fatal Err/# display. This
screen displays the Fatal Error log. This log contains a count of any fatal errors logged during
the unit's automatic self test.
31. Press Back to return to the Trace Mode display.
68P80401P03-O
BASIC LEVEL TEST MODES AND PROCEDURES: Test Mode Test Procedures
6-7