Bosch 1617 Operating/Safety Instructions Manual page 21

FEED
DIRECTION
I;l[=]l'_
CUT
WIDTH
DELUXE ROUTER GUIDE
(Not included, available as accessory)
The Bosch deluxe router guide is an optional
accessory that will guide the router parallel to
a straight edge or allow you to create circles
and arcs.
The deluxe router guide is supplied with two
rods and screws to fasten the guide (Fig. 27).
In addition, it features a fine adjustment knob
and indicator for accurately positioning the
edge guide relative to the bit. With the guide
installed and adjusted, the router should be
M6WING SCREW
FINE
ADJUSTMENT
FINE
ADJUSTMENT
KNOB
ROUTER
GUIDE
RODS
fed normally, keeping the guide in contact
with the edge of the workpiece at all times.
The deluxe router guide may also be
positioned directly under the router base for
operations where a cut is needed close to or
at the edge of the work.
The deluxe router guide includes a dust
extraction hood and the VAC002 vacuum
hose adapter.
For complete instructions on installation and
operation, please refer to the instructions
which are included with this accessory.
USE IN ROUTER TABLE
i
Your router can also be used in a router table.
The RAl161 fixed base is designed to allow
easy depth adjustment in a table. The RA1162
"D" D-Handle base will not fit in most router
tables.
The RAl166 Plunge Base is
not recommended for use
in a router table. Damage to plunge router
base may occur.
To eliminate the hassle of installing your
router's own base on the router table and later
having to convert it back for non-table use,
Bosch offers the optional RAl165 Undertable
Router Base (Fig. 28). The RAl165 base is
designed to be permanently attached your
router table, leaving your other router bases
ready for non-table use. The motor can be
quickly moved from base to base -- without
any tools!
10-24 Screw_
i
Ir
i
ounting
te
Quick-release
clamplever
anddepth
adjustment
controls should
facethe frontoftherootertable
-21-
Hex
Wrench
HoleforHex
Wrench
Shown after
suhhase has
heeo removed