Advertisement
cop-101 |
(AEP model:
up to Serial No. 501,000
UK model:
up to Serial No. 600,300)
if an RM-65 synchro remote control
unit is used to connect this
i
player with a Sony cassette deck equipped with a 4-pin remote con-
i
trol jack, the operation of the player and the cassette deck will be
synchronized.
Cassette decks which can be used with your CD player for
this special synchronized operation are those Sony models
which are equipped with a 4-pin remote conirol jack.
An RM-65 synchro remote control unit (optional) is required
to connect the CD player and the cassette deck.
|
CONNECTION AND PREPARATION
Turn the power on and set the
input selector according to the
input jacks to which the player
is connected.
3
Adjust the recording level
and set the cassette deck in
record stand-by mode by
2
Turn the power on and
insert a disc.
pressing the record and
forward buttons together
a
with the pause button.
Amplifier
tt tt:
to the
recording
outputs
to the CD
or AUX
inputs
Cassette deck
to the
to the synchro
Set the SYNCHRO switch
4 toON.
*
RECORDING
Desired action
Player operation
Synchro operation of-the cassette deck
When
play begins, the pause mode is released and
recording begins.
Press the pm PLAY button.
To record from the beginning
of a disc...
Press the #1 PAUSE button and select the
desired point with the j<q, Be] or manual
search buttons, then press the 1§ PAUSE
button again to release the pause mode.
When
play begins, the pause mode is released and
recording begins.
To record from a particular
point on a disc...
When play stops, auto record muting activates for
four seconds then the pause mode is assumed.
When play starts, the pause mode is released and
recording begins.
At the point where you wish to stop
recording, press the if PAUSE button.
Select the desired point with the ed, DR
and manual! search buttons, then press
the Hl PAUSE button again to release the
pause mode.
To move to a different point
ona disc...
When play stops, auto record muting activates for
four seconds then the pause mode is assumed.
When play ends...
Disc play is automatically reset to the
beginning of the first selection and the
player stands by.
To stop recording during
Press the RESET button.
play...
Advertisement
