Advertisement
1-3.
CONNECTIONS
@ Turn off the amplifier before making connections.
@ Be sure to insert the cable connectors firmly into the jacks.
Pr
Loose connections may cause hum and noise.
@ Connect
the red plug of the supplied
connecting
cord to the
right-channel jack [R] of the amplifier and the white plug to the
left-channel jack [L]: Otherwise, the right and left channels will
be reversed.
@ Leave a little slack in the connecting cord to allow for inadver-
tent shock or vibration.
Amplifier
—
a
atta tn
a
tg
CDP-101
Speaker system/
.
OOF QELY
| Sa
DOOD
FQ
PSS
to CD, DAD, auxiliary,
tuner or tape recorder inputs
AC OUTLET
|
to LINE OUT
AC OUTLET
'
An audio component whose power consumption is under 100 watts
can be connected to this outlet. This outlet is not controlled by the
i
front panel POWER switch.
Do not connect an electrical home appliance, such as an electric
iron, fan, TV or any other high-wattage equipment, to this ac outlet.
to a wall outlet
Connecting cord
(supplied)
to a wall outlet
Power cord
A white mark is visible on one lead of the power cord. This will help
you drive the CDP-101
and other components
in the system
"in
phase"
by aligning the ac power cord
polarities with ac outlet
polarities. In most cases, the marked plug of the CDP-101's power
cord should be inserted into the negative potential of the ac outlet.
,
Advertisement
