Kenwood CS-1022 Instruction Manual page 8

CONTROLS AND INDICATORS
CS-1022, 1021, 1012
Fig. 2
FRONT PANEL
CS-1022, 1021, 1012
CS-1020, 1010
CS-1020, 1010
@® $ Position
Rotation adjusts vertical position of channel 1 trace.
In X-Y operation, rotation adjusts vertical position of
display.
@ # Position
Rotation adjusts vertical position of trace.
In X-Y operation, rotation adjusts vertical position of
display.
VOLTS/DIV
Vertical attenuator for channel 1; provides step adjust-
ment of vertical sensitivity. When VARIABLE control
3) is set to CAL, vertical sensitivity is calibrated in 12
steps from 5 V/div to 1 mV/div.
For X-Y operation, this control provides step adjust-
ment of vertical sensitivity.
VOLTS/DIV
Vertical attenuator. Coarse adjustment of vertical sen-
sitivity. Vertical sensitivity is calibrated in 12 steps
from 5 V/div to 1 mV/div when VARIABLE control
@) is set to CAL.
For X-Y operation this provides step adjustment of ver-
tical sensitivity.
VARIABLE Control
Rotation provides fine control of channel 1 vertical
sensitivity. In the fully clockwise (CAL) position, the
vertical attenuator is calibrated. For X-Y operation, this
control serves as the Y axis attenuation fine adjust-
ment.
VARIABLE Control
Vertical attenuator adjustment. Fine control of vertical
sensitivity. In the fully clockwise (CAL) position, the
vertical attenuator is calibrated. For X-Y operation, this
control serves as the Y axis attenuation fine adjust-
ment.