Specifications - Kenwood CS-1022 Instruction Manual

SPECIFICATIONS
CS-1022 CS-1021 CS-1012 CS-1020 CS-1010
150GTM31A 150GTM31A
or 150UTM31
2kV
150GTM31A 150FTM31 150FTM31
2kV 6 kV 2kV
8x 10 div (1 div= 10 mm)
6 kV
Acceleration Voltage
Display Area
Rectangular, with internal graticule
CH1 and CH2 =
1 mV/div to 5 V/div, +3%
Type
VERTICAL AXIS
Sensitivity
12 steps, 1 mV/div to 5 V/div in 1-2-5 sequence.
Vernier control for fully adjustable sensitivity between steps.
Attenuator
1 MQ +2%, approx. 35pF 1MQ +2%, approx. 32pF | 1 MQ +2%, approx. 35pF
Input Impedance
Frequency Response DC; DC to 20 MHz, DC; DC to 10 MHz, | DC; DC to 20 MHz, DC; DC to 10 MHz,
2 mVidiv to 5 V/div -3 dB -3 dB -3 dB -3 4B
AC; 5 Hz to 20 MHz, AC; 5 Hz to 10 MHz,| AC; 5 Hz to 20 MHz, AC; 5 Hz to 10 MHz,
-—3 dB —3 dB —3 dB —3 dB
1 mV/div DC; DC to 10 MHz, DC; DC to 7 MHz, DC; DC to 10 MHz, DC; DC to 7 MHz,
—3 dB -3 dB -3 dB -3 dB
AC; 5 Hz to 10 MHz, AC; 5 Hz to 7 MHz, | AC; 5 Hz to 10 MHz, | AC; 5 Hz to 7 MHz,
-—3 dB -3dB -3 dB -3 dB
35 nsec or less 17.5 nsec or less 35 nsec or less
Rise Time 17.5 nsec or less
(20 MHz) (10 MHz) (20 MHz) (10 MHz)
35 nsec or less 50 nsec or less 35 nsec or less 50 nsec or less
(10 MHz) (7 MHz) (10 MHz) (7 MHz)
Operating Modes CH1; single trace
CH2; single trace
ADD; CH1+CH2 added dispiay
ALT; two waveforms alternating
CHOP; two waveforms chopped
Chop Frequency Approx. 250 kHz
Normal or inverted, CH2 only inverted
500 Vp-p or 250 V (DC + AC peak)
More than 8 div, i than 5 div, More than 6 div, More than 8 div, eee than 6 div,
DC to 20 MHz DC to 20 MHz | DC to 10 MHz DC to 20 MHz DC to 10 MHz
(input thru CH2, x 10 MAG not included) (x 10 MAG not included)
With TRIG MODE switch, X-Y
Channel Polarity
Maximum Input voltage
Non-Distorted
Maximum Amplitude
HORIZONTAL AXIS
Operating Mode With TRIG MODE switch, X-Y
operation is selectable. operation is selectable.
CH1; Y axis VERT. INPUT; Y axis
CH2; X axis EXT TRIG INPUT; X axis
100 mV/div
1MQ +2%, 1 MQ 42%,
approx. 32pF approx. 35 pF
DC; DC to 1 MHz, DC; DC to 500 kHz, DC; DC to 1 MHz, {| DC; DC to 500 kHz,
-—3 dB -3 dB —3 dB —3 dB
AC; 5 Hz to 1 MHz, AC; 5 Hz to 500 kHz,
—3 dB -3 dB
Same as vertical axis (CH2)
Sensitivity
Same as vertical axis (CH2)
Input Impedance
Frequency Response
3° or less at 50 kHz 3° or less at 100 kHz | 3° or less at 50 kHz
X-Y Phase Difference 3° or less at 100 kHz
Maximum Input Voltage Same as vertical axis (CH2) 50 V (DC +AC peak)
SWEEP
Triggering sweep
Sweep free runs in absence of trigger