Table of Contents
Advertisement
FEATURES
@ Vertical axis has high sensitivity and wide bandwidth
@ For convenience in making rise time measurements, the
and especially covers fully specified frequency response
0%,
10%,
90%
and 100%
levels are marked on the
at 2mV/div for all models.
graticule scale of the CRT.
CS-1022,
1021 ;
® Trace rotation is electrically adjustable from the front
Dual Trace
panel.
1mV/div
: DC to 10 MHz,
—3 dB
@ By SCALE ILLUM control, the waveform is easy observ-
2mV/div
: DC to 20 MHz,
—3 dB
ed in the dark and the photograph of the waveform
is
easy provided. (Except CS-1021)
CS-1012 ;
Dual Trace
® Selectable AUTO
FREE
RUN
function
provides sweep
ImV/div
: DC to 7 MHz, —3 dB
without trigger input signal.
2mV/div
: DC to 10 MHz,
—3 dB
@ The
FRAME-LINE
switch
provides
selection
of sync
pulse for sweep triggering from small amplitude to large
CS-1020 ;
Single Trace
amplitude
without
adjusting
when
viewing
composite
1imV/div
: DC to 10 MHz,
—3 dB
video waveforms.
2mV/div
: DC to 20 MHz,
—3 dB
@ For
CS-1022,
1021
and
1012,
vertical
mode
automatically
provides
the
trigger
signal
with
TRIG
CS-1010 ;
Single Trace
SOURCE and V. MODE switches.
imV/div
: DC to 7 MHz,
—3 dB
@ X-Y operation is easy provided by one-touche.
2mV/div
: DC to 10 MHz, —3 dB
CS-1022, 1021, 1012; CH1
Y axis,
CH2
X axis
® Vertical sensitivity range is selectable from 1mV/div to
CS-1020, 1010; VERT INPUT
Y axis
5V/div with rotary switch continuously.
EXT TRIG INPUT
X axis
@ Time base permits the high sweep speed.
@® CS-1022
and 1012
are provided with CH1
OUTPUT
CS-1022, 1020; 20nsec/div (x 10 MAG)
terminal to monitor input signal of CH1.
CS-1021,
1012, 1010; 50nsec/div (x 10 MAG)
@ CS-1020
and 1010 are provided with VERT OUTPUT
@ Vertical sensitivity
error and sweep rate error are +3%
terminal to monitor input signal of VERT INPUT.
and accurate measurements are provided.
@ The
150mm
rectangular
CRT
with
internal graticule
provides high brightness and accurate
measurements,
free of parallax error.
CS-1022,
1020; domed mesh type CRT with post-
deflection
acceleration
and
high
brightness
phosphors (acceleration voltage; 6 kV).
CS-1021,
1012,
1010;
high brightness CRT (acce-
leration voltage; 2 kV).
Advertisement
Table of Contents
