Kenwood DMC-G7R Instruction Manual page 39

Marks can be placed at regular intervals
so that the starting point of a track can be
determined when making a microphone
recording. This function is called the TIME
AUTO MARK function.
During Microphone Synchro Recording
TIME AUTO MARK
(set at 5-minute intervals in this example)
A TIME AUTO MARK is assigned
5 minutes after the previously
DMC-G7R(K-En)
Changing the TIME AUTO MARK setting
When the setting has been changed
to 10 minutes during recording,
a TIME AUTO MARK will be assigned
10 minutes afterwards.
assigned track number.
& 5S minutes
10 minutes 10 minutes
5 minutes
¥
P e e
s e a s A
*
a
~
Tr. No.1 Tr. No.2
During Microphone Manual Recording
A TIME AUTO MARK is assigned every 5
minutes (when the TIME AUTO MARK
setting is 5 minutes).
~ <a
Tr.No.1 Tr. No.2 | Tr. No.4
(Track number 1) Tr. No.3
Semerrs : Track number assigned by
TIME AUTO MARK function
umommen © Track number assigned because
of 3-second blank in audio
Engage Record Standby status.
® Connect a microphone, insert a recordable
MiniDisc, and press the RECORDING key.
Tr. No.6
Press the EDIT/AUTO MARK/TIME MARK key.
Operation changes as follows each time the key is
pressed.
1 S5min MARK: The Mark is assigned every 5 minutes
23min MARK: The Mark is assigned every 3 minutes
2 3) MARK OFF: The Mark is not assigned
10min MARK: The Mark is assigned every 10 minutes
EDIT/AUTO MARK
/TIME MARK
@ The interval between marks may differ slightly from the actual recording time.
m
2
)
ie
2)
aa