Kenwood DMC-G7R Instruction Manual page 35

DMC-G7R(
Select the Microphone Synchro Record level.
(The unit will select the starting recording level according to the audio.)
®@ Press the ENTER/SYNCHRO REC key.
Operation changes as follows each time the
key is pressed. (Changing operation while
recording is in progress is also possible.)
ie @ MIC SYNC H
@ MIC SYNC L
e Use the table at right as a standard
for setting the starting Synchro
ao
THT
About -24dB —4
Record level.
dBOO 40 "126
LLL LLL
About -12dB
Recording starts automatically as soon as audio is input.
© If there is a continuous blank for at least 3
seconds, the Pause status will be engaged.
(But the Pause status will not be engaged
for about 10 seconds after recording has
started.)
Pausing the Recording
Press the [>{]J key while recording is in
progress.
® The Microphone Synchro Record status will
be canceled and Record Standby status will
be engaged.
®@ To restart the Microphone Synchro Record
operation, press the ENTER/SYNCHRO
REC key.
Stop recording and turn the power off. (TOC is recorded.)
Track number, recording location, and
other data are referred to as TOC data.
(—(37] } When recording has been
Stop recording by pressing the Hi
(OFF)key once while recording is in
progress. ; completed and the power has been
When the key is pressed turned off, the TOC data will auto-
again, the TOC will be matically be recorded before the power
recorded and then the is tumed off.
power will be turned off.
this may result in a faulty recording.
Otes} Recording is not possible at the following times:
® Do not impact the unit while recording is in progress or "TOC EDIT" is displayed, for
a
® when the MiniDisc's erase protector is in the Open position. — [36]
aks LOIN |