Advertisement
Bhmcicwae
10 insert the connector panal until It stops.
12 (for only 14 inch monitors)
-
Hold the cabies (removed in @ from step
7} of the monitor using the cable clamp of
the SDI module.
13 Make two holes for connectors of the SDI °
module on the rear cover of the SDI
module on the rear cover of the moniter,
and stick the connector label beside the
holes.
f Moke hotes
O_}
with nippers
14 Repiace the rear cover of the monitor
using the 10 screws removed in step 1 so
that the SDI connectors expose from the
"year cover, and flx them with the supplied
SCTEWS.
.
re
> Supplied screws
we
G@BVTT
4 x 8)
Screw {black} x 4
Leave all other parts and wiring as they are.
5
Advertisement
