Advertisement
installation
+6 Connect the SDI module and the supplied
BB board te the monitor hoard.
See the next page for monitérs indicated in
the table "Monitor list 1"
i.
© Connect the connector of the stipplied
-3-pin connecting cable to the CN10
terminal (white) onthe sunplled BB
ie i 'BB board
3-pin connecting cable
CN10 oor) "Type Az -for monitors not
:
' Apdicated in the tables
. ""Monitor list 1% and
:
"Monitor list 2°:
Type B: for monitors indicated
:
'In the table."Monitor
- list 2"
@ Connect the CN9 terminal igrey) on the
BB board to the CN303 terminal {grey)
"onthe monitor board.
® If your rho is not initicetted in the
tahles "Monitor list 1° and "Monitor list
2", solder the end of the lead wire of
tha 3-pin connecting cable {type A} to
TP302_on the monitor hoard.
If your monitor. is indicated in the table
"Monitor list: 2°, you do not have.to
solder. it,. just connect the 3- spin.
connecting. cable (type B) to the CN505
terminat onthe monitor board.
4 The shape of TP302 is different according'to
the monitor board.
* Apply solder quickly because other parts
maybe weakened due to excessive heat. Take
' eare'not fo éolder other parts.
6
cable {type A
In the case of the
3-pin connecting
cable (type B)
© Connect the 12-pin connector of the SDI
module to the CNS terminal (white) of
the BB board, and connect the 6-pin
connector of the SDI module
to the
'CN607 (white) on the power board.
Fasten the cables
from the $D1
;
*
pledufe with the
12-pin
cable clamp.
Take cae not to touch-the pins of the terminals.
tdAtiaue -
* The shape of TP302 is different siteding to
the monitor board.
* Apply solder quickly because other parts
maybe weakeried due to excessive heat. Take
care not to.solder other parts.
:
@ Connect the connector'of the supplied _
3-pin connecting cable (type A} to the
_CN40 terminal (white) on the supplied
BB board, and connect the connector
Tin connecting cable ons
(red} of the supplied 12-pin connecting
cable to the CN14 terminal (red) on the
pin _
cable
BB board.
:
12in connecting cable
Connector
(white)
Connector
~,
Led)
~ BS board
3-pin heal ot
Pe
cy
cable {type Al
e d )
N10
=
(white)
© Peel off the adhesive tapes ofthe
_
supplied spacer {top and bottom}, and
* then stick the spacer and.BB board in
* that order to IC404-0n the monitor
aanaae
:
board.
9
oe
os
:
;
x: Cannect the 42-pin connector of the SDI
'module to the CN& terminal {<white) on
|
the BB board, and connect the 6-pin
connector of the SBI module to the
€N304 terminal (white) on the monitor
board.
12-pin
épin.
connector
= cannéctor"
© Connect the connector {white} of the
': 12-pin connecting cable to the CN303
¢ tarminal (White) on the monitor board.
* Fasten the cables from
the SDI module with
* the cable clamp.
@ Solder the end of the Jead wire of the
i ie
'3-pin connecting cable (type A) te
CNS (white)
__.TP302, on he moniter board.
:
.
:
CN304
E
ieee ted
Take care not to toiich. a pins of the se tseihnl
7
Advertisement
