Table of Contents
Advertisement
Cleaning the HMI screen
Clean the HMI screen as follows:
1. Apply the cleaning agent on the cleaning cloth.
2. Start cleaning at the edge of the screen.
3. Wipe with the cleaning cloth from the edge of the screen to the inside.
See also
Chemical resistance of the HMI device:
(support.industry.siemens.com/cs/ww/en/view/39718396)
10.5.2 Cleaning the cabinet and the charging cable
WARNING
Electric shock due to water ingress
Water entering the SICHARGE UC dispenser can damage the SICHARGE UC dispenser. If the unit is
damaged, dangerous voltages may be present on the cabinet or exposed components, which can
cause serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a pressure washer or steam cleaner to clean the SICHARGE UC dispenser.
WARNING
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the exterior surfaces of the SICHARGE UC dispenser.
Therefore, do not use any solvents. Also, never use aggressive or abrasive cleaning agents.
Permitted cleaning agents and tools
• Use only soft cleaning cloths.
• Use a mild, non-corrosive cleaning agent, even in the case of heavy soiling. An example of mild detergent
would be dishwashing liquid.
• Deionized water is particularly suitable for cleaning the unit.
Installation and Operations Manual | SICHARGE UC 150 UL Plug-in Dispenser
109
Advertisement
Table of Contents
