Equipment Supplied; Equipment Required - HP 10314D User Manual

Equipment
Supplied
Noted
Equipment
Required
The HP 103140 Preprocessor Interface consists of the following
equjpment:
• The preprocessor interface hardware, which includes the
preprocessor interface circuit card and cable assembly.
• The inverse assembly software on a 3.5-inch disk.
• This user's guide.
The preprocessor interface socket assembly pins are covered at the
time of shipment with either a conductive foam wafer or a conductive
plastic pin protector. This is done to protect the delicate gold-plated
pins of the assembly from damage due to impact. When you're not
using the preprocessor interface, protect the socket assembly pins from
damage by covering them with the foam or plastic pin protector.
The minimum hardware required for analysis of an 80386DX target
system consists of the following equipment:
• An HP 1650A, HP.1650B, HP 1652B, HP 16510A, HP 16510B,
HP 16511B, HP 16550.A, or HP 16540A,D with two
HP 16541A,O expansion cards.
• · The HP 10269C General Purpose Probe Interface, which
connects the preprocessor interface to the logic analyzer.
• The 803860X Preprocessor Interface and Inverse Assembler
(HP 103140).
Setting Up the HP 103140
1-2
HP 103140
80386DX Preprocessor Interface