No Configuration File Loaded; Selected File Is Incompatible; Inverse Assembler Not Found; No Inverse Assembly - HP 10314D User Manual

<+5V)
2
<
GND)
<+5V)
01650E67
Figure A-1. Pinout of the Logic Analyzer Cable
11
No Configuration
Verify that the appropriate module has been selected from the Load
File Loaded"
{module} from File {filename} in the HP 16500 disk operation menu.
Selecting Load {All}
will
cause incorrect operation when loading most
preprocessor interface configuration files.
11
Selected File is
The logic analyzer displays
this
message if you
try
to load a
lncompatible
11
configuration file for the wrong module. Ensure that you are loading
the appropriate configuration file for your logic analyzer.
11 • • •
Inverse
This error occurs if you rename or delete the inverse assembler file that
Assembler Not
is attached to the configuration file. Ensure that the inverse assembler
Found"
file is not renamed or deleted.
No Inverse
Verify that the inverse assembler has been synchronized by placing an
Assembly
opcode at the top of the display (not at the input cursor) and pressing
the Invasm key (see "Inverse Assembler" in Chapter 2).
HP 103140
80386DX Preprocessor Interface
Troubleshooting
A-3