Table of Contents
Advertisement
Note
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.
Special conditions for storage and transportation of the device are listed in section "Technical
specifications (Page 161)".
1.9
Warranty conditions
We expressly point out that the product quality is exclusively and conclusively described in the
sales contract. The content of this product documentation is neither a part of a previous or
existing agreement, promise or legal relationship, nor is it intended to modify these. All
obligations on the part of Siemens AG are contained in the respective sales contract, which also
contains the complete and solely applicable liability provisions. The provisions defined in the
sales contract for the responsibility for defects are neither extended nor limited by the remarks
in this document.
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB
Introduction
1.9 Warranty conditions
13
Advertisement
Table of Contents
