8.1.5.3
Device with one ULTRAMAT 7 analyzer module, high-temperature version
Overview
①
Gas connections for sample and reference gas
②
Cable glands clamping ring connections 6 mm (4 units)
③
Heated external sample gas and reference gas lines (not included in scope of delivery)
Figure 8-8
ULTRAMAT 7 high-temperature version, connecting gas
Procedure
1. Unscrew the union nuts of the cable glands
outlets
counter properly.
2. Connect the heated sample gas and reference gas lines
outlets. In the process, make sure that you insulate the cables properly.
3. Check whether the glands are connected firmly and check the pipe connections for leaks.
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB
①
. When tightening the union nuts at the gas connecting fittings, ensure that you
Connecting the device
②
and screw them into the gas inlets and
③
with the associated gas inlets and
8.1 Gas connections
103