Setting Edit Points Using The Recorder Only - Sony BETACAM SX A220P Operation Manual

To deleting an edit point
Proceed as follows.
IN button
OUT button
AUDIO IN
– +
TRIM
GOOD
LIST MARK
SHOT
DELETE
ENTRY SHIFT
IN OUT
DELETE button
Press the flashing DELETE button
together with the IN button or the
OUT button.
The DELETE button stops flashing,
and the edit point is deleted.
To modify edit points slightly
– +
TRIM
GOOD
LIST MARK
SHOT
ENTRY SHIFT
IN OUT
IN button
AUDIO IN
– +
TRIM
GOOD
LIST MARK
SHOT
DELETE
ENTRY SHIFT
IN OUT
DELETE button
TRIM+/MARK and
–/LIST buttons
OUT button
1
While pressing the recorder or
player IN or OUT button,
depending on the edit point that
you want to modify, press a TRIM
button (+/MARK or –/LIST) on
the same side of the control panel.
The edit point time data is
displayed.
Each time you press the +/MARK
button, you advance one frame,
and each time you press the –/
LIST button you return one frame.
2
After making the modifications,
press the IN or OUT button that
you pressed in step 1.
3-3-6 Setting Edit Points
Using the Recorder
Only
If you press the PLAYER/DMC
button to light the PLAYER/DMC
indicator on the control panel, you can
operate the player or an external VTR
with the recorder side buttons, and set
edit points.
When you do this, we recommend that
you inhibit the buttons on the player
side of the control panel to prevent
unintended operations. To inhibit the
player side buttons, set the "KEY
INH" to ON in the sub LCD menu
(see page 2-32).
3-9
Editing