Table of Contents
Advertisement
Removing a Cassette When Tape
Slack Occurs
If tape slack occurs in the unit, it is
necessary to open the control panel
manually and perform the procedure
described in the Maintenance Manual
(Part 1).
Head Cleaning
To clean the rotary and stationary
heads, always use the special-purpose
Sony BCT-5CLN cleaning cassette.
Follow the instructions with the
cleaning cassette carefully, as
inappropriate use of the cleaning
cassette may damage the heads.
To carry out head cleaning, use the
following procedure.
Consult a technician who has
undergone service training when tape
stack occurs.
1
Insert the cleaning cassette.
2
Press the EJECT button while
holding down PLAY button.
Head cleaning starts.
After a head cleaning operation
which lasts for about 5 seconds,
the cleaning cassette is
automatically ejected.
Note
When carrying out head cleaning
without using the automatic cleaning/
ejecting function described above, be
sure to eject the cleaning cassette
immediately after the cleaning
completes. If you leave the cassette in
the unit, the heads will be worn down.
A-1
Appendixes
Advertisement
Table of Contents
