Sony BETACAM SX A220P Operation Manual page 34

Power Preparations
POWER switch: ON
AC-550/550CE
DC
IN
DC power cord (supplied with
AC-550/550CE)
To use the AC-DN2(A)
Follow the procedure below to mount
the AC-DN2(A) on the top panel of
this unit, and connect to AC power.
You can supply the recorder and
player with power by fitting a single
AC-DN2(A) unit.
Here is explained the procedure for
fitting the AC-DN2(A) to the player.
1
Remove the cover of the battery
connector.
2-4
Preparations
AC power
cord
(supplied
with AC-
550/550CE)
To AC
power
DC
OUT
2
Insert the V-wedge shoe on the
AC-DN2(A) in the V-groove on
the player and slide the AC-
DN2(A) until the battery charging
connector is connected to the
battery connector.
3
Use the DC cable (supplied with
the AC-DN2(A)) to connect the
DC output connector on the AC-
DN2(A) and the DC IN connector
on the rear of the recorder.
When the AC-DN2(A) is fitted to
the recorder, connect the DC cable
to the DC IN connector on the
player.
Battery charging
connector
Battery connector