Display
ERROR
ARM OPEN
ERROR
CHECK BOWL
FOR SCALE
STOP MACHINE
OVERLOAD
SCALE
or
UNDERLOAD
SCALE
OVERLOAD
or
UNDERLOAD
when using
SensorControl Plus
Accessories
Accessories and spare parts can be purchased via trade stockists or customer service.
As the product range is being constantly extended, it is possible that there are additional
accessories which are not listed here. In this case, go to www.bosch-home.com to see
the latest accessories that are available.
Accessories
Possible cause
Swivel arm was opened. ■ Turn the rotary switch to y.
Bowl or bevel gear
(accessory) has become
loose.
Scale is switched on
while the appliance is
running.
The measurement
result is outside the
measurement and
display range of the
scales (-990 g to
5000 g)
Too much or too little
of the ingredients was
added for the selected
programme.
Designation Description
MUZ9VL1
MUZ9VLP1
Remedy
■ Press the release button and push the
swivel arm down until it locks into place.
■ Turn the rotary switch to y. Disconnect
the mains plug.
■ Tighten the bowl by turning until the
stop.
■ Tighten the bevel gear and close the
locking lever completely.
■ Switch the appliance off and wait until it
stops before using the scale.
■ Do not add more than 5000 g of
ingredients.
■ Do not remove more than 990 g of
ingredients.
■ Add ingredients according to the
specified quantities.
X "Using SensorControl Plus" see
page 19
Continuous-feed shredder
For cutting, shredding and grating fruit,
vegetables and other foods.
Multi-blender with citrus press
For chopping herbs, vegetables, apples and
meat, for grating carrots, radishes, cheese, nuts
and chilled chocolate.
For squeezing oranges, lemons and grapefruits.
Accessories
en
27