Bosch BDU314Y Owner's Manual page 101

English – 22
pointed tool (e.g. a hex key). The battery will be
unlocked and fall into the safety restraint (23).
Note: When removing the eBike battery, hold it firmly
in your hand.
❷ Press the safety restraint (23). Hold the battery
firmly in place if the battery is sliding out of the
bicycle frame. Then remove the battery.
Note: The unlocking element may vary from the im-
age and may be a manufacturer-specific solution.
Read the eBike manufacturer's operating instruc-
tions.
Note: As a result of varying designs, the battery may
need to be inserted and removed using a different
method. Read the eBike manufacturer's operating in-
structions.
Inserting the CompactTube Battery (axial)
2 2
❶ To insert the CompactTube battery (21), insert
it into the frame with the socket for the charging
connector (5) facing upwards until you hear the
battery click into place in the safety re-
straint (23). Ensure that the battery is aligned
correctly.
0 275 U07 3PX | (20.03.2023)
(21)
1 1
(23)
(1)
3 3
❷ Slide the battery into the battery lock (2) until
you hear it click into place in the battery lock (2).
❸ Then remove the key (1) from the battery
lock (2).
Always remove the key (1) from the battery lock (2)
after locking it. This prevents both the key from falling
out and the eBike battery from being removed by
unauthorized third parties when the eBike is not in
use.
Inserting and Removing the PowerPack battery
(1)
(2) (14)
2
1
In order to insert the battery, the key (1) must not be
inserted in the battery lock (2).
❶ To insert the PowerPack battery (15), place it
so that its contacts are in the lower holder (16)
on the eBike.
❷ Twist it into the upper holder (14) as far as pos-
sible until you hear it click into place.
❶ To remove the PowerPack battery (15), switch
it off and open the battery lock (2) using the
key (1).
❷ Twist the battery out of the upper holder (14)
and pull it out of the lower holder (16).
1
2
(15)
(16)
Bosch eBike Systems
(1) (14)
(15)
(16)